This
locker is both stylish and elegant in appearance as well as being tough
and durable, this product was originally designed as a solution to lockers
being vandalised in schools. The standard metal door locker is both
adequate and fit for purpose in a caring environment and will provide
trouble free service. The problem is when the environment is not caring;
this locker will only stand so much abuse and is susceptible to a
strong kick to the door of the lower compartment, having the effect of
pushing the door right into the compartment itself. This vandalism
results in administration and cost to the school and the locker or the
locker door will need to be replaced.
Compact grade laminate lockers were designed as a solution to this problem and are now available in two forms, lockers
with plant on or inset doors. The first product to market was the plant
on door locker, with the door fitting across the front of the lockers.
A swift kick to the door resulted in a sore foot and a desire not to
attempt the kick again. The door material is available in a wide range
of colours form wood grain, speckled, solid colours and special
finishes, the standard door thickness is 10mm and as durable as a
kitchen work top. Three of the most common manufacturers are Formica,
Trespa and Polyrey. The plant on laminate door locker when viewed from
the front presents a solid wall of laminate where none of the locker
frame is visible; this has the effect of turning a utility product in to
a very aesthetically pleasing product.
Product
life span of a standard metal locker in some schools can be as short as
3 years a standard laminate door locker will provide a 15 year life
span, should the need arise Total Locker Service can provide a full
range of replacement locker parts and service.
The
laminate door locker designed has also been designed to include an
inset laminate door although not as aesthetically pleasing the security
and durability of the product has been enhanced. The locker door like
the plant on door, sits on the frame of the locker, this has been inset
to allow a tight fit of the door within the frame, the standard locks
have been redesigned to take a patented version where the cam lock is
replaced with a special hooked âTâ shaped cam that engages on both sides
of the âTâ with the hook of the cam securely latched into the frame
making forced entry very difficult indeed. Also the locker cross members
dividing the compartment are fully secured into the locker frame making
entry to a locked compartment from the adjacent compartment very
difficult.
Two laminate door lockers both designed to provide both security, looks and a long life why look anywhere else.
Article Source: http://www.compensationsecrets.co.uk/